TBF™ Coatable Retarders: Negative C-plate CN-LT-1000 |
(≈0,3MB) |
Description
Crysoptix negative C-plate Thin Birefringent Film™ (TBF™) CN-LT-1000 is produced is produced by coating liquid organic materials on glass or plastic substrate via printing process, such as slot die (roll-to-roll or flat-bed) with subsequent drying. TBF™ coating technology does not require pre-formation of alignment layer on the substrate surface.
The coatable retarder possesses high birefringence and can be applied as a 0.3-5 μm thick coating for optical compensation of LCD. The TBF™ retarder can be used as an efficient lowcost internal or external patterned retarder for 3D LCD TV.
The retarder can be laminated with dichroic polarizer. |
| Coating Requirements |
Solution Properties |
|
|
| Film Properties |
|
| Environmental Stability |
| The TBF™ CN-LT-1000 retarder has been subjected to the wet environmental test (temperature 60 °C, and relative humidity 90%) for 1000 hours. The retarder demonstrates the high temperature stability (230 °C), strong adhesion to TAC and glass substrates, and high durability. |
|
*) Patents pending
|
